Baling Machine HDP
Hydraulic Discharge Press
Germany travels far, every day is new, and excellence is reached.
Working principle:The double-acting hydraulic cylinder drives the pressing plate to compress the material in the barrel.
Application:Used in conjunction with a planetary mixer.
Product overview
• The press machine (generally hydraulic-driven extrusion) is an extrusion device used in conjunction with various types of mixers for filling materials with certain fluidity; it has a simple structure and is easy to operate.
• This equipment consists of a "base, column, beam, and lower support crossbar, pressing plate, oil cylinder, hydraulic and electrical control system," etc.
Applicable range: materials with viscosity ≤ 2,000,000 cP (mPa.s centipoise) (but the consistency (such as solid content, etc.) cannot be too high, that is, "the fluidity cannot be too poor"!)
Product Parameters
|
Serial Number |
Model |
Working Volume |
Remarks |
|
1 |
HDP-16 |
10L |
Frame Type |
|
2 |
HDP-30 |
20L |
Frame Type |
|
3 |
HDP-45 |
30L |
Frame Type |
| 4 | HDP-60 | 40L | Frame Type |
|
5 |
HDP-90 |
60L |
Frame Type |
|
6 |
HDP-140 |
100L |
Frame Type |
|
7 |
HDP-200 |
150L |
Frame Type |
|
8 |
HDP-300 |
200L |
Thick Base Frame Type |
|
9 |
HDP-400 |
300L |
Thick Base Frame Type |
|
10 |
HDP-500 |
400L |
Thick Base Frame Type |
|
11 |
HDP-650 |
500L |
Thick Base Frame Type |
|
12 |
HDP-825 |
650L |
Thick Base Frame Type |
|
13 |
HDP-1000 |
800L |
Thick Base Frame Type |
|
14 |
HDP-1300 |
1000L |
Thick Base Frame Type |
|
15 |
HDP-2000 |
1500L |
Thick Base Frame Type |
|
16 |
HDP-2500 |
2000L |
Thick Base Frame Type |
| 17 | HDP-4000 | 3000L | Thick Base Frame Type |
Pre-sale, sale to after-sale, professional team one-stop service for you
More models can also contact us to support customization
Understanding needs
Talk to you in detail, tell us your needs
02
Manufacturing
We will complete the quality and quantity within a reasonable time.
04
Technical Installation
On-site installation and commissioning to stable production
05
Post-maintenance
If you have any problems in the later period, please contact us after sales.
06
Related Products
Vertical Kneading Machine HVKM
Two sets of vertically arranged spiral double-sided intermeshing blades installed on two stirring shafts rotate in opposite directions, causing the material to continuously move from the side walls of the mixing barrel towards the center of the mixing barrel or in the opposite direction. The two sets of blades constantly adhere to and peel away from each other, forcing the mixed material to undergo intense shearing, kneading, folding, pressing, and stretching actions within a small range. The increase and decrease of pressure and shear force can promote the material to achieve optimal dispersion of intensive mixing and kneading in a short time.
The serrated circular dispersion disc of the high-speed and efficient disperser completes the solid-liquid dispersion, wetting, deagglomeration, and stabilization processes at high speed within the container. This causes the slurry to form a rolling annular flow, generating strong vortices, with particles on the slurry surface spiraling down to the bottom of the vortex; a turbulent zone is formed at the edge of the dispersion disc at 2.5-5mm, where the slurry and particles are subjected to intense shear and impact; outside this area, two streams are formed above and below, allowing the slurry to circulate and flip fully; below the dispersion disc, the slurry is in a laminar flow state, with layers of slurry at different flow rates diffusing into each other to achieve dispersion.
Widely used in the mixing, kneading, crushing, stirring, and re-polymerization of high viscosity and high elastic-plastic materials, such as sealants, silicone rubber, glass glue, silicone, organic silicon, gasket glue, modified starch, chewing gum, bubble gum, pulp, cellulose, batteries, inks, pigments, dyes, pharmaceuticals, resins, plastics, vulcanized rubber, cosmetics, CMC, adhesives, and other industries.